Fire Officer Strategy and Tactics Practice Test

These questions are part of the practice quiz. Start practicing

• Which item is NOT listed as an essential component of an effective Tactical IAP?
• Which factors increase incident complexity requiring additional ICS staff?
• Mutual aid is described as:
• In a ventilation-controlled fire, which of the following would a thermal imaging camera most likely reveal?
• Why is leadership presence critical for fire officers during operations?
• Which term is imposed off center of the member?
• What term describes the interface between the hot and cool gas layers at an opening?
• What is the total energy released when a specific amount of fuel is oxidized?
• Which term extends upward from the floor to the ceiling?
• What is the core responsibility of the Incident Safety Officer?
• What is the primary objective of salvage operations?
• How do offensive and defensive strategies differ in terms of occupancy and risk?
• Which term denotes load located at one point in a building?
• In the five levels of command, what is Level 4?
• Heat, smoke, and light are examples of what?
• A false work is created using treated wood to support poured concrete as it cures, which can burn away and create a collapse hazard. What is this method called?
• What authority does the Incident Safety Officer have if operations become dangerous?
• What is the objective of forcible entry operations at a fire scene?
• Which statement best describes effective command presence on the fireground?
• Under what conditions is an offensive interior attack considered appropriate?
• Which construction type is best described as 'Main Street U.S.A.', with masonry bearing walls that run perpendicular to the street and non-load bearing walls parallel to the street, often featuring a cockloft that is several feet high and unlivable?
• How should pre-incident plans influence tactical decisions at a fire scene?
• What is the purpose of a staging area on an incident?
• Which stage comes after Fully Developed and indicates the fire is winding down due to fuel and/or oxygen depletion?
• On the fireground, how should PPE be used and air managed?
• Which elements are included in an Incident Action Plan to guide current operations?
• Which action best isolates the fire area to prevent spread?
• In a high-rise fire, which feature is essential for moving personnel between floors?
• What term describes a rapid chemical reaction that gives off energy and products of combustion that are very different in composition from the fuel and oxygen that combined to produce them?
• If interior conditions make an interior attack unsafe, what is the recommended approach?
• Size-Up aims to answer which question?
• Which term means any action that maintains or alters the building or its components?
• Which ICS section is primarily responsible for developing the IAP and tracking resources, and is led by the Planning Section Chief?
• What is the primary goal of searching the fire area and adjoining spaces?
• What constitutes best practice for PPE and SCBA on the fireground?
• In incident mapping, which option describes the method using letters A, B, C, and D to map a geographical area and designate exposures by side letter plus a number?
• In incident command, what are the three standard priorities that govern actions?
• Which material is known for high compressive strength with relatively low tensile strength and is often reinforced to improve tensile capacity?
• What term refers to the total energy released during oxidation of a given amount of fuel?
• Which document communicates incident objectives and resource assignments for a defined period?
• Which term has two basic types: load bearing and non-load bearing?
• What is a key priority when rescuing occupants during a structure fire?
• Which term is defined as any structural element or elements of a building (walls, floors, balconies, etc.)?
• Which role is primarily responsible for identifying hazards and monitoring safety during an incident?
• Which construction type may feature an exterior brick veneer while its interior and structural members remain combustible?
• The explosion of accumulated fire gases generally caused by admitting air into a superheated environment is known as which phenomenon?
• Which term describes a load applied at a single location, causing high local stress?
• Which factor increases ICS staffing needs?
• What is the function of a Staging Area Manager?
• Which term has two basic types: load bearing and non-load bearing?
• Which concept states that being able to communicate will have a direct effect on success or failure, with examples such as state-funded talk groups and locally-shared frequencies?
• What model includes heat source, fuel, oxygen source or oxidizer, and chemical reaction?
• What is the primary purpose of the IAP in coordinating resources?
• Which term specifically refers to the self-weight of the building and permanent fixtures?
• Which factor is least directly related to fatigue risk during an operation?
• Which term describes a modification of matter such as freezing or boiling that does not involve changing the chemical identity?
• Which framing system consists of wood studs that run from the foundation to the roof, can be recognized by windows that align in a straight vertical line, and is similar to post and beam but with no inherent fire stopping between floors?
• Which item is listed as a component of Tactics?
• What is the main purpose of cooling the space from the safest location?
• Which duty is NOT part of the Staging Area Manager responsibilities?
• Which factors influence the length of an operational period and crew fatigue?
• A fire attack mode tactic used to reduce temperatures inside a building prior to entry is called what?
• Dynamic IAP revision during transition periods?
• Which sequence correctly orders the four stages of fire growth from earliest to latest?
• Which term describes stretching or pulling of a component?
• Which framing system can be identified by windows aligned in vertical lines and studs that run from the foundation to the roof?
• Which construction type is characterized by combustible materials that create void spaces through which fire can travel, increasing collapse risk, especially in newer buildings?
• What is the purpose of a rehab area on the incident scene?
• Which sign indicates a ventilation-controlled fire with exterior doors and windows warming to the touch?
• What is the primary objective of conducting searches in fire areas and adjoining spaces?
• Which term denotes load delivered from an atypical direction?
• Which term describes the condition causing two structural members to slide past each other?
• Which concept describes how an incident organization grows as the incident expands, adding divisions and groups and forming an operations section, along with a safety officer and logistics section?
• Which product contains a wide range of irritating substances and is influenced by the size of the fire, openings, and compartment size?
• What is a key element of on-arrival size-up?
• What is the purpose of demobilization planning on an incident?
• What typically determines the length of an operational period in the incident action plan?
• How does building construction type influence tactical decision making?
• Which stage of fire growth reaches its peak when all surfaces and gases within the compartment are on fire?
• Which observation is a typical sign that a fire is ventilation-limited?
• What is the purpose of an Accountability System on a fire scene?
• Which mode of heat transfer moves heat directly from one object to another?
• Which term can be written or spoken, but should be simple and effectively communicate the plan?
• Which two roles work together to ensure rapid rescue if a firefighter becomes trapped?
• Which feature refers to pre-stressed tendons within concrete that may fail when exposed to fire, affecting the structural strength?
• Exterior walls are usually masonry in construction, with interior lumber dimensions described as staggering and large columns and beams.
• Which interior tactics model is used to extinguish fires and is spelled as a two-letter plural?
• Which chemical process is described as enabling a fire to grow?
• Which product of combustion contains a wide range of irritating substances and is influenced by fire size and openings?
• Which roofing system is composed of metal sheets over joists with an adhesive that liquefies when heated, trapping gas and hindering firefighting access?
• Which construction method uses falsework to support poured concrete on site and can burn away, creating a collapse hazard?
• What is essential for sustaining fire attack lines in building fires?
• Recognition-Primed Decision Making (RPDM) stands for what?
• Which term means load other than dead load?
• What is the primary objective of isolating and controlling the flow path?
• Which weather factors influence firefighting strategy and safety?
• What operational considerations are critical in high-rise fire operations?
• Which term means any action that maintains or alters the building or its components?
• All structural components of the structure are protected in some way from the products of combustion. Typically mid and high-rise structures with high-occupancies. What designation applies?
• What is the role of the Public Information Officer during a major incident?
• Which term refers to elements that extend upward from the floor to the ceiling?
• Which letters are used to map a geographical area for exposures?
• What process should be used to weigh risks against potential benefits before committing resources to a dangerous operation?
• Which mode of heat transfer is carried by infrared radiation?
• How can on-scene communication impact crew safety and mission success?
• During a major incident, who coordinates with command on public messaging and communicates information to the public?
• The Fire Tetrahedron adds which element to the Fire Triangle?
• What approach ensures clear communications on scene within a command structure?
• Which material offers impressive compressive strength at relatively low cost, used in floors, walls, and ceilings, and is noncombustible but has low tensile strength unless reinforced?
• What is a key consideration when performing ventilation from within a structure?
• What is the optimum span of control in ICS, with an acceptable span of 2-7?
• Which stage occurs when the fire has used up much of its fuel or oxygen and begins to spiral toward extinction?
• What is a systematic approach to searching a dangerous structure?
• Which measure describes the energy released per unit time during combustion?
• Confinement focuses on which objective?
• Which term describes squeezing or pushing of a component?
• Which construction category describes impressive compressive and tensile strength in light-weight members that have little inherent fire resistance and will fail rapidly without fireproofing?
• Which statement best describes signs of a ventilation-controlled fire?
• Which term describes stretching or pulling of a component?
• Occurs when concrete is heated and the moisture expands within concrete causing fractures and chips to flake off, exposing the metal framework. What is this phenomenon?
• In firefighting operations, 'sequential actions' refer to which concept?
• Which term is imposed at a right angle to a supporting member, creating a twisting force?
• Which stage of fire growth is characterized by the fire consuming the fuel of origin and heating nearby objects to off-gassing?
• How should tactical actions align with the Incident Action Plan objectives?
• During a multi-agency incident, what is the purpose of the Public Information process?
• Which term is defined as the weight of the building itself and any equipment permanently attached or built in?
• The first six components of NIMS emphasize using plain language in communication. Which option reflects this emphasis?
• Which statement BEST describes the concept of command presence?
• Which of the following are indicators a structure may be nearing collapse during a fire?
• Which of the following is NOT listed as a Tactics component?
• Which ICS form is commonly used to track unit assignments and on-scene status?
• Recognition-Primed Decision Making (RPDM) emphasizes decisions guided by what?
• To handle increased complexity, which of the following is an appropriate method to adjust span of control?
• Flashover is best defined as what phenomenon?
• What is essential to ensure safety before entry in a hazardous atmosphere?
• What is defined as how an assignment will be accomplished by a deployed resource?
• Which term describes twisting of a component?
• What is the primary role of a Rapid Intervention Team on the fireground?
• Who directs all operations at the scene and coordinates tactical assignments?
• What is the optimum span of control in ICS, with an acceptable spread of 2-7?
• Which term denotes load delivered in a very short time?
• Which is the second priority in incident management?
• Which system is held together by vertical posts and horizontal beams, featuring an open stairwell that allows products of combustion to extend from one floor to another?
• HRR is usually expressed in British thermal units and is affected by fuel type.
• What is mutual aid, and why is it important for strategy and tactics?
• Which term describes the coordination approach where multiple agencies share command?
• Which term refers to load added to the building after construction?
• Which factor is not typically used to determine the length of an operational period in the IAP?
• Which term passes through the center of supporting members?
• What is the correct sequence for the classical decision-making model?
• Which term describes a process that releases energy in the form of heat and sometimes light?
• What term is defined as the general plan or direction selected to accomplish incident objectives?
• Which term would describe a load that occurs suddenly, such as a person jumping on a floor?
• In the five levels of command, what is Level 3?
• Which section is led by the Planning Section Chief?
• Which term describes a rapid chemical reaction that releases energy and produces combustion products different in composition from the original fuel and oxygen?
• Under which circumstances should the IAP be revised or updated?
• Which term would describe a load that causes twisting because it's applied at a right angle to the member?
• How should ventilation be coordinated with suppression activities?
• Which action is typically performed after extinguishing to ensure no hidden fires or extension remains?
• Which list correctly orders the first three basic strategies in priority order?
• What is the purpose of an Incident Action Plan (IAP) on incidents?
• Which term is defined as spanning the length and width of the building and supporting the upper floors and roof?
• Which elements are identified during initial size-up after arriving on scene?
• Which mode of heat transfer involves movement of heat through a fluid such as hot smoke?
• Which construction type is defined by all structural components being combustible, sometimes with an exterior brick veneer?
• Which designation applies to structures where all structural components are protected from combustion, typically used in taller buildings with high fire resistance requirements?
• Which product of combustion will have the most impact on firefighters?
• Which construction type is described as having exterior walls that are usually masonry, but with interior lumber dimensions that are notably large, and with columns at least 8 by 8 inches and girders and joists at least 6 by 10 inches?
• Which term refers to the process by which hydrogen and oxygen combine to form water?
• Backdraft is best defined as what phenomenon?
• During the initial assessment, what information is most critical to guide suppression strategy?
• Where is the fire located?
• When should ventilation be initiated during a structure fire?
• Which principle states it is not about who is in charge, but about who is in charge of what?
• Ventilation decisions during a structure fire should be coordinated with which plan?
• Which measure describes the energy release rate during a fire?
• After cooling the space from the safest location, which objective is next?
• Which stage of fire growth is defined as the fire just beginning?
• Which statement best describes the two-in/two-out safety concept in interior operations?
• Which material begins to distort and lose strength when unprotected at around 1000°F and will expand and twist at higher temperatures, with water able to stop elongation or buckling?
• Which term describes squeezing or pushing of a component?
• Name Level 2 in the five levels of command.
• Which safety measures are essential when working in confined spaces or hazardous atmospheres?
• Which practice is described for maintaining accountability during a dangerous structure search?
• Which term describes twisting of a component, a type of internal moment causing rotation about an axis?
• Which action is performed first as part of the initial size-up on arrival?
• What is the primary purpose of overhaul after extinguishment?
• What is the recommended maximum span of control in most fire service incidents, and how should it be adjusted for complexity?
• Which option is NOT one of the standard priorities used to govern actions in incident command?
• Which is Priority 1?
• Which item is included in the size-up?
• What roof assembly consists of metal sheets laid over steel bar joists with an adhesive that liquefies under heat, trapping gas under the roofing and making access and extinguishment difficult?
• A pre-mixed pocket of fire gases that ignites when it comes into contact with an ignition source describes which phenomenon?
• What is the primary purpose of an Incident Action Plan (IAP) in fire ground operations?
• Which system uses pre-stressed tendons within concrete that may fail when exposed to fire, causing loss of compression or torsion resistance?
• When a new Incident Commander takes over, what immediate action should occur?
• Which construction type is described as the most common seen by firefighters today, with exterior walls, interior walls, ceilings, floors, and roofs all made of combustible materials, and with the exterior possibly brick veneer?
• What is the role of a Division Supervisor in a multi-division incident?
• What is the primary role of the Logistics Section at an incident?
• Parts of the building are built in a different location and then shipped to the construction site. Prevalent in highway bridge construction; tilt-slab construction. Which construction method is this?
• Which term refers to any load other than dead load?
• The general term for weight either designed into a structure or added later is what?
• Which of the following is an essential component of an effective Tactical IAP?
• Which factors should guide a fire officer's decision between an offensive interior attack and a defensive exterior operation?
• What are the three strategic priorities used to guide fire officer decision making?
• Which statement best describes the relationship between tactical actions and IAP objectives?